
Cyber Swap Meet
This page will be dedicated as a virtual swap meet table. In order to make it work, and to avoid any problems, make sure you fully understand the following simple but important rules:
1: Scale Model Corvettes Web Page is not responsible for the postings here. They are not verified for accuracy.
2: Contact the other party directly to complete the transaction. As in any business transaction, use your judgment.
3: Only scale Corvettes related parts or kits will be allowed to be posted.
4: We reserve the right to edit or reject postings based on contents, size etc.
5: E-mail to tatocorvette@hotmail.com with detailed list or kits, whether you need them or have them to offer, and how to contact you.
6: Postings will be updated periodically.
7: Please email if you want an item to be removed.
8: There will be no charge for postings. This is a free service to our visitors and contributors.
Now for the fun part:
Parts or kits needed:
- I’m looking for a complete 1/12 ’67 Corvette model kit. Box condition is of no concern since the kit will be built. Please contact me at csavaglio@hotmail.com
I am looking for Grand Sport Corvettes prefably from the early years and any of the pototype vetts. Contact J'anette' at janettejk@hotmail.com
I am also looking for 1992 to present Heritage Collector cards (Corvette)9 to a page.
1959 Corvet race car.
1963 Mako Shark.
Indy Show Car.
1991 Corvette Jet Boat.
1990 Corvette Cerv III.
janettejkerr@hotmail.com
- I need a set of wheels and tires from the Revell WOF 2000 convertible kit. I can be contacted at corvettemike1978@yahoo.com . Thanks,Michael Wheeler
- I'm looking for a Headlight lens from the Monogram 1/8 scale '65 Corvette. You can contact me at cruzrod@yahoo.com Thanks William Chun
- I'm interested in 1/8 scale Corvette models. You can contact me at Jefferyfisher@fishers.cncfamily.com
- I'm looking for AMT T420 or MPC 1-7305 kits. Both are 1973 coupes. Prefer sealed boxes, but I'll work with you for these kits in any condition. Contact me at vette73@msn.com
- I am in need of the rear glass for a Revell '97 Corvette and one taillight for an AMT '57 Corvette. Thanks, Mesa. You can contact me at Mesamodel@aol.com
- Want to buy Revell '69 Corvette 427 Kit #7149. Please contact me at wally@charlotte.infi.net
- Interested in the AMT 6914 ('64 Corvette Convertible) or AMT 6774 ('63 Convertible). Contact Alan AGleeson@aol.com
- I am looking for a windshield for a 1/8 '82 Corvette Classic Edition, that was damaged in a move. Please contact Ron ronjp@recorder.ca
- I am looking for a 1/25 to 1/12 scale model of a 1981 corvette. I am ineterested in any difficulty If it is a snap tight I would love to help my son(s) build it. Feel free to email me @: jdads2@hotmail.com
- I need 1978 thru 1985 diecast models 1/32 by action duntov. Please reply to: jgs@rconnect.com
- I'm in need of pro stock rear slicks for 1/12 '67 vette that I'm building , stock are to small. thanks jbagaas@yahoo.com (1/29/01)
- "Mecom Racing Team" decal for a Corvette Grand Sport, any scale. Contact Mike at perhach@keynet.net
(5/4/01)
- I am looking for a kit of a 1984 Corvette. Contact me at j49wil@yahoo.com Thanks! (6/30/01)
- I am looking for a complete 1/25 or 1/24 scale 1977 corvette kit, AMT model T483 or MPC model 1-7705. A 1976 kit may do as well, AMT model T468 or MPC model 1-7605. Please contact me at froberson@atlanta.qcdata.com. Thanks, Frank (7/24/01)
- I have two 1/8 corvettes 1965 and 1982 that are missing some pieces. Any suggestions? Thanks, Martin mgsykora@home.com (9/1/01)
I'm looking for some MPC '78 Pace Cars.The condition is unimportant as long as the spoilers are there. Thanks.
kawriderzr7@aol.com (9/1/01)
I need two 1/8 scale tail light bezels and lenses for a monogram '65 corvette. daniel hot.rods@verizon.net (9/1/01)
I am looking for '65 '66 '67 vette convertible non-big block. Prefer '66 is first choice doubleh@buckeye-express.com (10/18/01)
I AM LOOKING FOR A FRONT AND REAR WINDSHIELD FOR A 1/16TH MPC 63 CORVETTE STINGRAY. I WOULD BE INTERESTED IN BUYING A PARTS KIT IF ANYONE HAS ONE. mjpricetx@prodigy.net
Will trade: 1/8 scale 82 Collectors Edition complete body decals and CE "finned" wheels For: 1/8 scale C3 slotted wheels. Contact: quimio@aol.com
Looking for a large 1/8 or 1/12 scale (not sure), orange corvette model I believe it is a 1974-1977 coupe. I am not sure which co. manufactured it, but I would be grateful for help in locating one...thank you dpacm@aol.com
Hi, I am looking for any kit from around 1968 to early 70's. Preferably the stingray ones, preferably black, but it doesn't matter. Contact me at triess@engineering.uiowa.edu
Hi, I am looking for Monogram '53 and '57 Corvette kits(a couple '57s and several '53s) and Monogram '85 coupe, '87 conv., '92 conv., '92 ZR-1, '95 Indy pace car, '96 Grand Sport conv.(a couple of those):
Contact Brian: bhuck@firstam.com
Looking to obtain in any condition the following models:
AMT 6915 1965 CONV
AMT 6925 1965 COUPE
AMT 6916 1966 CONV.
AMT 6926 1966 COUPE
MPC #2 1965 Big Block Coupe
MPC #5 1966 Big Block coupe
Please contact contact me at LTWALTHER2@aol.com
I am looking for some parts for the Monogram #2608 '85 Corvette Coupe in 1/8 scale. I need 1 headlight lens, 1 tail light lens, rear deck emblem and a dash decal sheet. Please email rmewald@rochelle.net Thanks, Bob
I need two tires for Monogram 1978 Corvette 1/8 Scale. I pay you a good price. Thanks! You can contact me at mikko_73@msn.com
I have a Monogram 1/8 65 Corvette model that I want to modify to match up with my 1/1 scale version. I need to find a set of 1/8 scale American Mags (with slightly larger profile tires -radials- than the stock kit, if possible). Contact me at rbuchman@regence.com
I am looking for the following two Corvette kits: AMT or MPC 1966 Stingray Convertible / AMT or MPC 1977 Corvette Stingray
The kits need not be in perfect or mint condition boxes. They will be built. I would also accept a complete (or nearly complete) built up of either car. Please contact me at BJK869@aol.com
I'm looking for a dashboard for a monogram 1/8th scale 65 corvette sting ray. I would also like to purchase a 1/8th scale 78 corvette. You can contact me at linton383@msn.com Thanks, Kenneth
Wanted: Junk body (or roof panel only required) for 1/12 Revell Vette Stingray. Thanks Ted tkennedy@worldbank.org
Parts or kits offered:
- I have a huge collection of Vette parts and pieces, parts cars, restorable cars and kits. I might have something you need. You can reach me at kawriderzr7@aol.com
- Must part with small collection of Corvette Model Kits. 1/8 Scale - ' 65, '82, ' 85. 1/12 Scale - Stingray, One kit, 3 in 1 - 1/12 th scale ' 67-427Coupe & 1/24th ' 53, 1/12th ' 82 Collectors Edt., 1/24th scale ZR-1, 1/25thC-4 Roadster. Other Factory Promotional Corvette Models, 2ea ' 78 1/8thScale Kits in varrious stages of assembly. Contact Al at adblaster@aol.com for model mfg. kit numbers and condition. All sold at best offer.
- 1953 Corvette die-cast unassembled model kit. (Monogram). NIB and in mint condition. Also 1953 plastic kit available. Contact Paul obmerc@hotmail.com
- Two unassembled Monogram 1/8 scale Corvette kits. One is a 1985 (#2608) still sealed in cellophane. The second is a 1965 (#2600). The 1965 is complete, but the box is no longer sealed. This one has the hollow, black sidewall tires. Each is available to the highest offer. Contact denyer@pilot.msu.edu ___(6/23/01)
- FOR SALE!! a variety of Corvette models plus a Book: CORVETTE STING RAY 1963-1967 (Sports Car Color History) by Mueller Contact: Jonathan Strickland 7506 Plott Rd Charlotte, NC 28215 jestrick@earthlink.net (7/24/01)
- AMT 1995 Corvette Convertible- Partially assembled, no paint, missing wheels, tires, decals. Looks complete but may be missing other parts not sure.
AMT 1957 Corvette Street Machine Parts- Instructions, (1) Chrome sheet includes; Windshield frame, Steering wheel, Grille, Head & Taillight buckets, Front & Rear Bumpers, Front & Rear License Plates. (1) Clear Sheet includes; Windshield, Turn Signals, Headlights. Nonplated parts; (2) Frames, (2) Firewalls, (2) Interior/Floorpans, (2) Front & Rear Valances, (2) Dashboards, (2) Lower Front Suspensions, (2) Taillights, (1) Radiator, (1) Hood, (1) Pair of Inner Fenders, (1) Set of Interior Door Panels, (1) Seat Assembly, (1) Pair of Front Springs, (1) Pair of Front Spindles, (1) Set of 4 Wheel Backs, (1) Front Sway Bar, (1) Pedal Assembly, (1) Pair of Fender Scoops, (1) Steering Shaft, (1) Steering Column (1) Master Cylinder.
AMT(?) 1957 Corvette Parts Car- Missing Windshield & Windshield Frame and (1) Rear Wheel/Tire/Wheel Back Assembly. Poorly Built.
Revell 1999 Corvette Hardtop- Missing (4)Wheel/Tire/Wheel Back Assemblies. I really hate to get rid of this one, but I have so many other projects it would be a while before I got to do anything with it so I'd rather see someone else get it that could use it rather than sit on my shelf. Joeseph Chernauskas jvcskc@soltec.net (10/18/01)
- Will trade: 1/8 scale 82 Collectors Edition complete body decals and CE "finned" wheels For: 1/8 scale C3 slotted wheels. Contact: quimio@aol.com (10/18/01)
- I have many complete kits & many parts some new some used.1/8th thru 1/25th.E-mail me with wants. Mike: mikekook@megsinet.net (11/2/01)
- 1/16 scale MPC 57 Corvette Trophy series kit for sale. New, everything is in original sealed packages. Includes operating headlights and taillights, carpeted interior, display base and wiring. ERTL stock #6426, replaces MPC stock #1-3041. Contact Paul Weaver, mcg@mags.net.
- I have the Monogram '82 Corvette Collectors Edition kit unbuilt and intact for sale to best offer. The decals are a bit ordinary, as is the box, but it is all there. It is located in Australia and my e-mail is sfirth1@pacific.net.au
- I have an un-started (still in bags) Monogram 1:8 scale Metalflake '65 'vette. I'm in the UK but I run an international courier company so shipping it over the pond shouldn't be too much hassle. If anyone is interested, I'm open to offers: phil.smith763@ntlworld.com
Page updated 07/29/06